This is topic fox IRS swap driveshaft?? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028412
Posted by Blow_U_In_Reverse (Member # 12298) on
:
which driveshaft do I use with a t5 and irs in a foxbody?? can i use the stock 5.0 and just change the rear flange? or stock 03/04 cobra and change the front yoke? is the length gonna work on either one or will i have to get a custom driveshaft??
any help is appreciated..
-FiJi-
Posted by 90 7up lx (Member # 10304) on
:
Change the pinion flange in the rear end with with the one off a solid axle....then mock ip your t5 driveshaft if its too long then trim a lil bit off the yoke were it goes into the tranny...
Posted by RSA-Mustang (Member # 11540) on
:
quote:
Originally posted by 90 7up lx:
Change the pinion flange in the rear end with with the one off a solid axle....then mock ip your t5 driveshaft if its too long then trim a lil bit off the yoke were it goes into the tranny...
+1 use your stock driveshaft and change the flange if IRS is 03-04, 99-01 IRS use the same flange which bolts right up. I used my stock driveshaft and didn't change flanges when swapping a 99 IRS a while back
Fueled by Ford Mustang Owners
on CaliforniaFords.com