Which head gaskets to use? - Northern California Ford Owners

This is topic Which head gaskets to use? in forum Tech Talk at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028378

Posted by Andy9093 (Member # 1959) on :

Wondering which head gaskets to use for my setup. Just blown the current one that are the felpro 9333pt2. And I really don't want grove the head or block for the wire oring thing.

Here's my current setup running 12#s of boost, AFR 185, 8:1 pistons. E303 cam.

Thanks in advance

Posted by 92_5.0 (Member # 7624) on :

I'm running a similar set up and use Fel-Pro 10112 http://www.summitracing.com/parts/fel-10112/overview/make/ford

Posted by 79 cobra (Member # 10137) on :

fel pro 1133

Posted by racsirx (Member # 1710) on :

I like the felpro 9333pt1, if you blew them then I would say you have a problem with your tune or your block or heads aren't flat enough. You can setup your motor for MLS gaskets but if your tune isn't right, you wont blow a head gasket you can seriously damage your motor. Also if you are using a stock block with high HP with boost, I will say blowing head gaskets is normal

Fueled by Ford Mustang Owners
on CaliforniaFords.com