Banjo bolt washers - Northern California Ford Owners

This is topic Banjo bolt washers in forum Tech Talk at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028360

Posted by SikWiditMke (Member # 9699) on :

I installed my PBr set up, and have a small leak from one of the banjo bolts. I heard the chain store banjo bolts washers are no good, which is what I used. Where do you guys get them from?

Posted by SikWiditMke (Member # 9699) on :

Bump

Posted by LXjames (Member # 10791) on :

Mike washers are washers is it snug enough to compress the washer insuring a tight seal?

Posted by MachYou (Member # 7934) on :

Banjo bolt washers are copper.

Posted by SacStangDriver (Member # 8304) on :

quote:
Originally posted by MachYou:
Banjo bolt washers are copper.

+1 napa can match up the correct copper size.

Posted by SLOWSN95 (Member # 8269) on :

Use only Ford Banjo washers. Used chain store washers before and 3 out of 4 times they've leaked because they are not thick enough.

Posted by SikWiditMke (Member # 9699) on :

Thanks guys. The assorted back wasn't working for me, so I had napa match me one that was close to stock, and it worked out great!!

Fueled by Ford Mustang Owners
on CaliforniaFords.com