This is topic 302 motor question in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028280

---

Posted by Stimpys 5.0 (Member # 5829) on :
 
Hey what the difference between a 95 ford pickup 5.0. Versus a foxbody 90's 302? I know the knock sensor in the rear of the block anything else. Thanks
 

---

Posted by Cobra 93-4992 (Member # 4992) on :
 
It's not as hott
 

---

Posted by Beastly GT500 TVS (Member # 9723) on :
 
different cam an different intake manifold and no mass air
 

---

Posted by Stimpys 5.0 (Member # 5829) on :
 
Well the reason I ask. Is I'm putting the mustang engine into the 95 pick up. But I was thrown off when I saw the knock sensor in the rear of the engine. So I had to drill n tap it to accommodate for the sensor. I was just curious if there was anything else.
 

---

Posted by Stimpys 5.0 (Member # 5829) on :
 
..

[ 2013-07-27, 10:49 PM: Message edited by: Stimpys 5.0 ]
 

---

Posted by turbo50 (Member # 6700) on :
 
Different firing order
 

---

Posted by Marks93 (Member # 11130) on :
 
Nope and nope! My '95 has the 13726548 firing order AND has mass air.

Yes, the cam and intake are different to provide more torque (I believe). Need it pushing around 5000 lbs!!
 

---

Posted by Stimpys 5.0 (Member # 5829) on :
 
Yeah I saw the firing order and it is the same. But motor is in and I will be firing it up Tomorrow. Thanks for the info.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com