This is topic Will OE cobra brackets work on a fox?? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=027812

Posted by quicksilver91 (Member # 9034) on :
 
So I've hit a road block and I'm trying to figure out my options. I bought sum 5 lug axels from my classmates 96 cobra to do my 5 lug cobra brake swap, and I got gt/v6 brackets from a friend. I have OE cobra brakes off a 96 or 97 and there going on a 91 gt. The problem was that the caliper wouldnt fit over the rotor. I'm assuming because I don't have the cobra brackets. Now my question is my buddy is giving me OE cobra brackets will these e the same as the north race brackets or will it not work. I measured the rear end in the 96 cobra and it's about a inch longer then my fox, so the brackets may not work because there are OE cobra brackets and not the north race brackets to keep fox track width. Any info help for the people who have done this swap let me know.
Also getting the ball joints in seems impossible I got the 94 up moog
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com