This is topic 66 Mustang 95 5.0 in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=027811
Posted by 331-66 Coupe (Member # 12453) on
:
So I'm putting 95 5.0 331 stroker in my 66 coupe, and Im wondering what to do about the dipstick. I had to change to a front sump Milodon pan with a baffle in it and I was wondering if the stock dipstick will work, or am I going to have to do something else. Im using the 95 front accessories.
Posted by turbo50 (Member # 6700) on
:
Tap the dipstick hole in the block with 1/8 npt.
Posted by norcalfiddy (Member # 11207) on
:
You gotta drill or change the timing cover to a older 302 one
Posted by 68stanger (Member # 7842) on
:
^^What these two above wrote.^^
I used a 87-93 style timing cover, just had to plug the block (1/8" npt) and drill the timing cover to mount/insert the dipstick tube. if your using a serpentine setup with latemodel brackets you will need to drill out that bracket so the tube can pass through to the timing cover.
i know that your 94/95 cover is physically different then the 93 and down, not sure if it can be used.
[ December 12, 2012, 12:06 PM: Message edited by: 68stanger ]
Posted by Duncan Motors (Member # 7045) on
:
i have a pic of this already done in a 68 cougar with the front serpentine as well if u wanna see what 68 stang means?
Posted by norcalfiddy (Member # 11207) on
:
Here's mine, with serpentine belt setup
Fueled by Ford Mustang Owners
on CaliforniaFords.com