This is topic starting problem in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=027714
Posted by SUMO (Member # 8553) on
:
So when I go to start my car the the ignition gets stuck and still send power to the starter and the starter keeps cracking over. In till I hit the Solenoid then It's fine. But also when I go turn off the car, the car stills stays on for a couple of seconds. I already change the Solenoid what else can be my problem?
Posted by norcalfiddy (Member # 11207) on
:
Could be ignition switch
Posted by LXjames (Member # 10791) on
:
I fixed a gt at the shop with that problem. You probably have a stuck solenoid. Take off the pick up wire on the solenoid and try to start it. If it cranks over its your solenoid.
PS: thank you john Duncan for showing me that tip!!
Posted by SUMO (Member # 8553) on
:
Forgot to mention also switch the ignition switch. Put I'll try that trick with the pick up cable
Posted by fredfifty (Member # 10320) on
:
check that the metal base of the solenoid is grounding to the body (sand down the body so it gets a good ground)...and get a motorcraft solenoid from ford, not oreillys
Posted by Wht86drop (Member # 12104) on
:
I have the same problem with my solenoid. Its new and sticks. No thanks to kragen
Fueled by Ford Mustang Owners
on CaliforniaFords.com