This is topic Old skoo pundits. Driveshaft question. in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=027539
Posted by ECOboostin (Member # 4347) on :
 
My 70 mustangs is rocking a 5 speed and 9". I need a drive shaft made maybe. The car put down 530ft lbs so I was wondering what's the best setup. Steel or aluminum? I'd like to keep costs down but will cough it up if i need to. It needs to handle some drag strip on tires as well.

I took it to sac last week and snapped off the pinion shaft. Broke the u-joint and the end of the drive shaft. Any Bay Area spots to recommend?
 
Posted by SETONKILL (Member # 7277) on :
 
Concord driveline specliest.an there in pittsburg
 
Posted by 89TRUNK (Member # 2506) on :
 
Drivelive Services in San Leandro, off teagarden and marina
 
Posted by Secnd2nun64 (Member # 1431) on :
 
http://www.iedls.com/
 
Posted by Duncan Motors (Member # 7045) on :
 
drivelines services in sac, ask 50 reasons dan for there number. ive had the one in concord be over priced for weights flying off, vise marks bends, and shitty service, and way over priced! the one in concord used to be gd. The kids got the place and ran it into the ground. the one in sac was a one day deal. and to shorten and balance with u joints was like around 100 bucks no joke.
 
Posted by moeofit32 (Member # 10393) on :
 
quote:
Originally posted by 89TRUNK:
Drivelive Services in San Leandro, off teagarden and marina
good shop ive used them before the guys was very helpful
 
Posted by Sikwidit-blumaxx88 (Member # 11046) on :
 
United driveline Albany ask for J-R he knows his shit
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com