This is topic 5 lug conv. in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=027497
Posted by 93NotchbackLX (Member # 12122) on :
 
Where can i fnd one at a fair price?
 
Posted by rollin5ive0 (Member # 8592) on :
 
pick n pull most likely! you can even check thier inventory online now, and surrounding areas. unfortunately, it dosent say whats left on the car but it does have the date the car was put out. if you find a few stangs with relativley recent dates its prob worth a shot out and two bucks entry....you might also try lkq/parts planet. i havent used them for a mustang full rear end setup but i did replace a camaro one and i wanna say it was around $300 housing and all its worth a call to see what kind of pricing they offer for the mustang! [patriot]
 
Posted by MaK_1967v8 (Member # 12187) on :
 
94+ GTs and cobras have the same front spindles and rear axles as you do. Cobra's have rear disc though.

if you can find a GT at pick n pull that still has its rear axle and front spindles. theres your conversion. Not much to them at all.

If you decide to go the used route, i'd get some new bearings while you're in there anyway. preventative maintenance FTW!
 
Posted by 70mach351 (Member # 7528) on :
 
ive got a set of refurbished spindles off a 94-95 for 200
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com