Author
|
Topic: Fox 5 lug conversion gurus
|
D.R.E
¯
Member # 10484
|
posted
hey guys ive been thinking about converting my 4 banger notch to 5 lug.I wanna go all sn95 front and rear no mark vii and ranger bullshit ha...i seen you could use a sn95 brake booster and por val from a sn95 without gutting the porportion valve and using the adjustable por valve is this true?? and i know if wanna use my ebrake to work iwould need to get the 93 corba cables.LMK ifiam missing anything thanks Cafords....
-------------------- Local 3 Operating Engineers member 1991 titanium frost coupe 1991 x chp coupe
Posts: 505 | From: Vallejo | Registered: Nov 2010
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
dont need the sn95 booster, i would use the 5.0 booster just because its a smaller diameter than the 4cyl one. bypass the stock prop valve and just put an adjustable one at the passenger side firewall, easiest way imo. you will need the adapter fitting or conversion brake lines for the front/passenger side, 5.0 front shocks, and if you change the whole rear end, you will need a different rear brake hose. used 93' cobra cables on my friends car and they seem to work ok
-------------------- 91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
triple b
¯
Member # 8763
|
posted
its not the booster you need for 4 disc its the master cylinder Sn95 is 15/16" or 93 cobra 11/8" i think. I used a Sn95 mastercylinder and booster and i didnt do the proportion valve figured the valve on the sn95 is already setup for disc why gut one valve to put an adjustable one in No problems for the last 4 yrs [ July 05, 2012, 11:24 AM: Message edited by: triple b ]
-------------------- 1988 4cyl conv 306 HCI "sasha" 2004 tahoe Sold- 87 GT, 72 chevelle, 63 biscane, 82 monte carlo, 73 nova, 88 silverado,
Posts: 1730 | From: sacramento ca | Registered: Nov 2008
| :
|
|
racsirx
CAFords OG
Member # 1710
|
posted
93 Cobra brake cables can only be used if you have a 93, for some reason Ford made all 93 Mustangs brake cable setup different than the other years, instead of having a floating merge for the cables, the merge was attached to the body, some guys cut that section out of a 93 and tack weld it in on an older year, also I would use a 94-95 brake booster. [ July 05, 2012, 11:29 AM: Message edited by: racsirx ]
-------------------- 88 Saleen #564 88 GT 331 NOVI2000 88 Coupe TURBO 9.75@142 95 Cobra R #75-SOLD 06 F250 13 BMW AH3 17 GT350 #5556 GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
I did a 91 4cyl conversion with sn95 rear end and 93 cables...? Fit like stock
-------------------- 91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
And if u use 94-95 m/c its 1 1/16" bore
-------------------- 91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
and it will bolt to any fox booster
-------------------- 91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
D.R.E
¯
Member # 10484
|
posted
quote: Originally posted by triple b: its not the booster you need for 4 disc its the master cylinder Sn95 is 15/16" or 93 cobra 11/8" i think. I used a Sn95 mastercylinder and booster and i didnt do the proportion valve figured the valve on the sn95 is already setup for disc why gut one valve to put an adjustable one in No problems for the last 4 yrs
Ok triple b just to clarify one thing you used the sn95 master cylinder and booster plus the sn95 port Val? Without have to do the gutting and throwing another adjustable port Val?
-------------------- Local 3 Operating Engineers member 1991 titanium frost coupe 1991 x chp coupe
Posts: 505 | From: Vallejo | Registered: Nov 2010
| :
|
|
racsirx
CAFords OG
Member # 1710
|
posted
quote: Originally posted by 5.0 LsX: I did a 91 4cyl conversion with sn95 rear end and 93 cables...? Fit like stock
I don't what you did but here is a 93 setup
Here is what a 87-92 setup kinda looks like
I believe Tim used 95 Cables and removed that bracket from a 95 and tack welded into his Foxbody. [ July 05, 2012, 01:58 PM: Message edited by: racsirx ]
-------------------- 88 Saleen #564 88 GT 331 NOVI2000 88 Coupe TURBO 9.75@142 95 Cobra R #75-SOLD 06 F250 13 BMW AH3 17 GT350 #5556 GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
the second pic does look like sn95 cables, its been about a year since i did the swap on my friends car so i dont remember too clearly, but i dont think he had the bracket like your first pic, everything was routed like stock but had the caliper ends on it for disc, works great w/ no other modifications...
might as well cash out $45 each from 50resto and get the ones made for the swap, thats what i was planning whenever i get around to doing it on my car
-------------------- 91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
triple b
¯
Member # 8763
|
posted
quote: Originally posted by D.R.E: quote: Originally posted by triple b: its not the booster you need for 4 disc its the master cylinder Sn95 is 15/16" or 93 cobra 11/8" i think. I used a Sn95 mastercylinder and booster and i didnt do the proportion valve figured the valve on the sn95 is already setup for disc why gut one valve to put an adjustable one in No problems for the last 4 yrs
Ok triple b just to clarify one thing you used the sn95 master cylinder and booster plus the sn95 port Val? Without have to do the gutting and throwing another adjustable port Val?
exactly....just had to cut add the correct flair fittings to the old hard brake lines and re-flair them tighen and bleed the whole system. I have a coupe1988 if that any comparison and you can buy the parking brake cables u need from 50resto u need one M 2810 A and two M2809 A brake linesthis also requires you to modify the e brake handle [ July 05, 2012, 04:38 PM: Message edited by: triple b ]
-------------------- 1988 4cyl conv 306 HCI "sasha" 2004 tahoe Sold- 87 GT, 72 chevelle, 63 biscane, 82 monte carlo, 73 nova, 88 silverado,
Posts: 1730 | From: sacramento ca | Registered: Nov 2008
| :
|
|
4 CAM FOX
¯
Member # 11891
|
posted
Just ditch the stock proportioning valve. The SN-95 valve will not be the correct bias because they are heavier cars. You can use a few different master cylinders, It just depends on your brake setup front and rear. The booster just dictates pedal feel. I didnt change mine when I did the conversion.
-------------------- "The clutch is on the left. Gas on the right." "What's this one in the middle?" "It's for pussies."
Posts: 1798 | From: NOR*CAL | Registered: Apr 2012
| :
|
|
triple b
¯
Member # 8763
|
posted
quote: Originally posted by 925_GT: Just ditch the stock proportioning valve. The SN-95 valve will not be the correct bias because they are heavier cars. You can use a few different master cylinders, It just depends on your brake setup front and rear. The booster just dictates pedal feel. I didnt change mine when I did the conversion.
LOL what is the correct bias? Can u tell me exactly on the turn on that adjustable prop valve no? The stock valve is fine no need to spend another 80bux to have a ugly valve by your passenger side firewall
-------------------- 1988 4cyl conv 306 HCI "sasha" 2004 tahoe Sold- 87 GT, 72 chevelle, 63 biscane, 82 monte carlo, 73 nova, 88 silverado,
Posts: 1730 | From: sacramento ca | Registered: Nov 2008
| :
|
|