This is topic H/C/I set up. Help in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=026757
Posted by GtStang (Member # 11121) on :
 
I need help deciding what cam to run I got a 93 cobra upper lower gt40 heads (going to get them ported), ford racing lifters, 1.7 RR's, BBK LT's, SLP exhaust,  Could I run a F cam?. Or what would I have to do to run that cam?. Oh and it's 302. 
Thanks Cali Fords would much  appreciate the help.
 
Posted by blown95svt (Member # 8893) on :
 
Best results will be from a custom cam. You can always run a tfs1 or e cam, I had a b cam retarded 4* with 1.7's in my last hci car. It ripped
 
Posted by GtStang (Member # 11121) on :
 
quote:
Originally posted by blown95svt:
Best results will be from a custom cam. You can always run a tfs1 or e cam, I had a b cam retarded 4* with 1.7's in my last hci car. It ripped
So a F cam wouldn't work?
 
Posted by Greasy (Member # 5258) on :
 
quote:
Originally posted by GtStang:
quote:
Originally posted by blown95svt:
Best results will be from a custom cam. You can always run a tfs1 or e cam, I had a b cam retarded 4* with 1.7's in my last hci car. It ripped
So a F cam wouldn't work?
It may work but you will need to check piston to valve clearance.
 
Posted by GtStang (Member # 11121) on :
 
quote:
Originally posted by Greasy:
quote:
Originally posted by GtStang:
quote:
Originally posted by blown95svt:
Best results will be from a custom cam. You can always run a tfs1 or e cam, I had a b cam retarded 4* with 1.7's in my last hci car. It ripped
So a F cam wouldn't work?
It may work but you will need to check piston to valve clearance.
Okay thanks guys, but if the piston to value clearance is fine it is a good cam too run with this set up?.
 
Posted by Greasy (Member # 5258) on :
 
quote:
Originally posted by GtStang:
quote:
Originally posted by Greasy:
quote:
Originally posted by GtStang:
quote:
Originally posted by blown95svt:
Best results will be from a custom cam. You can always run a tfs1 or e cam, I had a b cam retarded 4* with 1.7's in my last hci car. It ripped
So a F cam wouldn't work?
It may work but you will need to check piston to valve clearance.
Okay thanks guys, but if the piston to value clearance is fine it is a good cam too run with this set up?.
As long as coil bind isn't an issue, then yes it would be a good cam for that combo.
 
Posted by triple b (Member # 8763) on :
 
if you have not bought it yet dont
 
Posted by Jaejae5.0 (Member # 7958) on :
 
tfs1 with 1.7s..no issues and sees 6500 rpm daily..upgraded springs is a must..goodluck [patriot]
 
Posted by nitrous_bob (Member # 77) on :
 
^^^ yup

trickflow stage 1 is a beauty
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com