This is topic sn95 platform on fox? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=026490
Posted by 93lx4cyl (Member # 10517) on :
 
Wondering how much of the sn95 bolts up to a foxbody? Suspension, brakes, lines etc. Had an idea on getting a sn95 and have fun with it do some mods than try and swap the parts into my 4cyl fox project.(I.e rear end, front end, motor granny, ecu, fuel lines, suspension) thought it would be better being an obd2 set up versus obd1 because of the newer tech making getting it bar refd fairly easier.
 
Posted by Blind (Member # 3052) on :
 
pretty much everything but the front swaybar will bolt on.

but the easiest swap for smog is a 93 5.0 engine. It would not require going to the smog ref for a BAR sticker, FYI.
 
Posted by 93lx4cyl (Member # 10517) on :
 
I know, had a smog tech tell me 91-93 would swap fine no bar sticker required. It thought it would be cheaper since I've found a lot of sn95s for less than 5.0 Foxs that aren't all beat up or abused even though any v8 mustang gets beat up at some time lol.
 
Posted by 5.0 with some go (Member # 8248) on :
 
no smog tech is going to be able to tell where the motor came from , all you need to do is put on stock accessories from a 89-93
 
Posted by samsbolt390 (Member # 11645) on :
 
+1 if you installed a earlier upper than you couldn't tell and I doubt the smog tech is gonna check and or know casting dates...
 
Posted by NEIGHT (Member # 8741) on :
 
I passed smog with flying colors N I have a '95 block on my '86. [patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com