This is topic Fox Coil-Over question, which set-up do I get? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=026459

Posted by Ernesto_jr (Member # 10802) on :
 
 -

HATE how my car sits. Stance is a little off and rear sags and a bit while front gap is little high. Was told front coil-overs will do the trick. I saw these but which one do I get guys AND WHY?

http://www.latemodelrestoration.com/products/Mustang-Front-Coil-Over-Kits

UPR
12" W/250LBS
14" W/150LBS
14" W/175LBS

[ March 23, 2012, 02:18 PM: Message edited by: Ernesto_jr ]
 
Posted by bayareapits (Member # 4048) on :
 
sup ernesto i ordered a set peeps say its good..so im trying it
 
Posted by racsirx (Member # 1710) on :
 
Are you going for drag? 14" 150lb and 14" 175lb would good for drag. What springs do you have on there now?

[ March 23, 2012, 08:49 PM: Message edited by: racsirx ]
 
Posted by RAP66 (Member # 3360) on :
 
becareful with UPR...
I would suggest any other brand other than that company.

my setup is MM Coilovers & Bilstein. 12"springs
 
Posted by 5.0 with some go (Member # 8248) on :
 
don't go cheap with that ride ...upr sucks if ur daily driving they clunk there made to go straight for 1/4th a mile, Id go with maximum motorsports or griggs coilovers with bilsteins or koni's
 
Posted by Ernesto_jr (Member # 10802) on :
 
quote:
Originally posted by bayareapits:
sup ernesto i ordered a set peeps say its good..so im trying it

waddup!

thanks guys also for your help...

Im not dragging, just weekend driving and maybe a few times to work. i hear mixed reviews for UPR also...

I am currently running Eibachs and Koni Reds
 
Posted by racsirx (Member # 1710) on :
 
I would just remove the isolators In the front and it will lower the front end 1/2" to 3/4".
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com