This is topic supercharger,compression in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=026437

---

Posted by REDLIGHTING (Member # 11296) on :
 
So what's a good safe compression ratio for a 363 dart iron eagle forged internal with a novi 2000 @ about 15 psi, all so what's the best cam for a combo like that.

Thx
 

---

Posted by RAP66 (Member # 3360) on :
 
I'm still a rookie but I think 8 or 9:1 would be considered blower friendly.

At least you know what your building ahead of time. I did my build as 10:1 then dropped the blower in it. <Hindsight is not my friend>
 

---

Posted by racsirx (Member # 1710) on :
 
I would use anything between 9:1 to 10:1 compression, but you will have a hard time making 15lbs of boost with a Novi2000 and 363 unless you use Cogged pulleys.
 

---

Posted by REDLIGHTING (Member # 11296) on :
 
Thx guys,
Oh ya I'm also going to run meth/water injection
 

---

Posted by tlcluver21 (Member # 9062) on :
 
With water meth 10.1 will be fine as far as cam goes call Anderson motor sports up and tell them ur configuration and they will build you a cam to go with ur set up
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com