This is topic flexplate delima...please help in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=026296

---

Posted by 61falcon (Member # 11574) on :
 
I am putting a 94 5.0 HO motor in my 61 falcon with a c4 tranny. the problem is that the flexplate for the 94 is for an AODE tranny. It has steps on it that make it stick out from the motor about 1 1/2 but there are only about a 1/2 inch of room. should i be using a flat flexplate out of something earler such as a 70 or so ford.
thank you for your time and energy.
 

---

Posted by slocobra (Member # 6311) on :
 
Yes, a safe bet woud be to buy a 50oz. Plate for c4. There cheap from summit racing.

B&m 50339 - 157 tooth

B&m 50338- 164 tooth


There is a few cheaper ones those are just examples, roughly 80.00 each and sfi approved
 

---

Posted by Camara90 (Member # 134) on :
 
I am pretty sure this is the block plate you will need.

http://www.summitracing.com/parts/PMA-PA26445/Application/?prefilter=0
 

---

Posted by slocobra (Member # 6311) on :
 
^ pretty cool its for both! Hadnt seen that before.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com