This is topic Extended studs in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=026276
Posted by D.R.E (Member # 10484) on
:
Hey guys my bearings on my hubs are bad so I plan on replacing them but they have the extend studs I would like to keep so where could I go to get them removed and pressed or could this be a DYI type job thanks
Posted by D.R.E (Member # 10484) on
:
Anyone??
Posted by straightliner1 (Member # 2679) on
:
Any machine shop locally will be able to do it
Posted by D.R.E (Member # 10484) on
:
Thanks bro you got a rough idea of how much they will charge
Posted by 79 cobra (Member # 10137) on
:
do it your self get a 2x4 and a hammer and hammer them out and when you want them in on your new hub get a lot of washers and the stud bolt tighten it down intill it preses in and thats it
Posted by D.R.E (Member # 10484) on
:
Thanks bret
Posted by 79 cobra (Member # 10137) on
:
yupp no problem
Posted by 8lbCoupe (Member # 11416) on
:
quote:
Originally posted by D.R.E:
Anyone??
Hit ma phone I have the impact gun to get them back in the axles
Posted by 02angrybird (Member # 11259) on
:
You can also use a vise and a deep socket. I've always used a hammer to knock them out and a nut/washer to install them. You can do it how ever you want.
Fueled by Ford Mustang Owners
on CaliforniaFords.com