This is topic starting to work on my 70 what to do next? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=025949
Posted by 70stang351w (Member # 9948) on
:
so my 70 has been in my garage for the last year and need to start working on it it currently has block 69block
msd wires, coil, and a Ready-To-Run Distributor
edlbrock - intake, waterpump, fuel pump
holly street avenger 650
long tubes to custom striaght pipes to spintech prostreets side exit think thats it besides a complete mustangs plus suspenion and subframes and center connector.
want to add a carb spacer but need to cut the hood and add my 429 scoop to let it fit
not sure what cam is in it. pistons arent stock was told it was bored .20 over but not sure there was no stamp or anything on them when i had to pull the heads from a headgasket leak
any suggestions would be great
Posted by wilit (Member # 3367) on
:
What's your budget?
Posted by Phil G 59 (Member # 10028) on
:
You can find cam specs with degree wheel and dial indicator. Check bore with dial bore gauge, snap gauge and micrometer or caliper. Its good to know these things :-) btw... DONT CUT! you dont need a spacer.
Posted by 70stang351w (Member # 9948) on
:
Well the hood is getting cut due to the boss 429 hood I have for it just don't know how to do body work as for a price looking between 800 to 1200 that's in a few months just starting to plan it out.
Posted by 61falcon (Member # 11574) on
:
Hit me up when your ready, I have a fab. shop in modesto and im sure I can hook you up for about 5 or 6 hundred.
Posted by 1FAST89GT (Member # 5071) on
:
Chris hit me up when you are ready.
Fueled by Ford Mustang Owners
on CaliforniaFords.com