This is topic power steering pulley in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=025856

---

Posted by blue95gt (Member # 9798) on :
 
can get it to budge. need to pull off the pulley to get to one of the bracket screws. any ideas?
 

---

Posted by Blind (Member # 3052) on :
 
rent a pulley puller from an auto parts store, or pull the pump instead?

what are you trying to do?
 

---

Posted by blue95gt (Member # 9798) on :
 
ya im just gonna do that. me and my friend are doing my h/c/i swap
 

---

Posted by phonso302 (Member # 9260) on :
 
Go buy the pulley puller its only like 14 bucks. Its good to have one laying around. I have one you can borrow if you want to make the drive
 

---

Posted by blue95gt (Member # 9798) on :
 
do i have to take the allen bolt out? or does the puller pull out over allen? i borrowed a pulley puller from my neighbor. if so, is it a left or right hand thread?
 

---

Posted by MUSTTANGUY (Member # 2251) on :
 
No bolts to pull off, it just looks like there is due to the hex recess on end of shaft.
The pulley will come right off with the correct puller, or bend with the wrong style puller.
You need the puller which has two halves shells and a sleeve which slides over them and a center bolt.
 

---

Posted by JZTRK (Member # 7641) on :
 
http://www.autozone.com/autozone/accessories/OEM-Power-steering-pulley-puller-installer-kit/_/N-264z?counter=0&filterByKeyWord=puller&fromString=search&itemIdentifier=2075_0_0_
 

---

Posted by turbo50 (Member # 6700) on :
 
I have a trick I use on the SN95s

Looks like you are local if you are still fighting this thing. I also have the puller.

Dan
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com