This is topic cobra calipers on 94/95 spindle... direct bolt on? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=025738

---

Posted by 1sick65 (Member # 3957) on :
 
does the spindle require anything extra to accomodate the cobra calipers?
 

---

Posted by ratfast (Member # 8720) on :
 
There is a bracket that spaces the caliper out to run the 13" rotors. Most remanufactured calipers for the Cobras come with it in the box. I used to have a couple sets, let me know if you need them.
 

---

Posted by MUSTTANGUY (Member # 2251) on :
 
All of the 13" Cobra/Mach1/Bullitt calipers will bolt right up to the 94/95 spindles.

Only the 99-04 11" GT/V6 aluminum dual piston PBR caliper requires some clearancing to the arch.

I have refurbished 94/95 spindles available if needed
 

---

Posted by 1sick65 (Member # 3957) on :
 
thanks guys,
i have the spindles and am getting the calipers. are the bolts needed anything special?
 

---

Posted by MUSTTANGUY (Member # 2251) on :
 
Most of the mid-full size Fords use the same caliper bolts, Don't recall the size offhand.
You will also need a balljoint spacer if installing on Fox control arms.
I have machined ball joint spacers and caliper bolts available.
 

---

Posted by 5.0 LsX (Member # 10017) on :
 
all of the caliper bolts are the same, i would recommend pressing in sn95 ball joints
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com