This is topic assembling a short block in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=025572
Posted by 915.0gt (Member # 9518) on
:
Swaping short blocks, can I or should I use motor oil on like the cam bearings or anything else as I assemble it so that its not completely dry? Or do I need something other than motor oil?
Posted by SSF 50 (Member # 7219) on
:
all i used was 30w oil & its runnin strong!!
Posted by sydewayzLX50 (Member # 10217) on
:
Assembly lube
Posted by SLOWSN95 (Member # 8269) on
:
quote:
Originally posted by sydewayzLX50:
Assembly lube
This ^^^
Posted by Built88LX (Member # 10758) on
:
+2 ARP assembly lube works great
[ November 08, 2011, 10:29 AM: Message edited by: Built88LX ]
Posted by CenCal Five0 (Member # 10533) on
:
I used engine asslembly lube and clevite bearing lube on all bearings.
Posted by Secnd2nun64 (Member # 1431) on
:
ARP ultratorq on the bolts. assembly lube on the bearing surface, leave the backsides of the bearings dry. I used redline assembly lube.
Fueled by Ford Mustang Owners
on CaliforniaFords.com