This is topic EFI 351w Swap. in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=025567
Posted by AR_Stang (Member # 10223) on :
 
I just picked up a 351w F4TE complete long block. I know ill need a 351 swap oil pan, power steering bracket, and a efi manifold. Now can i use my Fcam and springs with the stock 351 heads,pushrods? Any other parts i might need? I'm also going to swap over my turbo, how much psi can i safely run? It'll be a stock shortblock and heads for now.
Thanks [patriot]
 
Posted by 915.0gt (Member # 9518) on :
 
Yes you can re-use the cam and springs, and I think you can use the pushrods too. But that f cam is gona be too small to be of real use with a 351. 302 parts make 302 power

[ November 07, 2011, 05:50 PM: Message edited by: 915.0gt ]
 
Posted by 351stang (Member # 7579) on :
 
i believe the push rods are longer for a 351 i got some stock ones you could have
 
Posted by AR_Stang (Member # 10223) on :
 
I'll give a try with the fcam see what it does. I'm planning of getting some heads soon, then maybe I'll try a custom cam. How much psi you guys think I should run?

351Stang- I'll try to make it out there Friday or Saturday night after work for the oil pan [patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com