Author
|
Topic: fox rear into a maverick
|
rollin5ive0
¯
Member # 8592
|
posted
anybody know if a rear end out of an 87-93 mustang will fit into a maverick
-------------------- 875.0gt 90dtlx5.0 93blkvenumos5.0COBRA#3377 96redthundr4.6l4vCOBRA 964.6l2vGT 895.0lGT 93cleancorlgreen5.0GT 93meancoralgreen5.0GT
Posts: 1830 | From: 707 vacaville ca | Registered: Aug 2008
| :
|
|
Sydewayz_Stan
¯
Member # 10217
|
posted
You'll have to convert to a 4 link setup
-------------------- -90 Vert-SOLD -91 Notch-SOLD -2000 Explorer 5.0-SOLD -72 Maverick-SOLD -2004 GT, vortech V2 si, 10 psi- -2002 F150 supercrew-
Posts: 3432 | From: 707 vallejo/richmond 510 | Registered: Aug 2010
| :
|
|
rollin5ive0
¯
Member # 8592
|
posted
thank you ,thank you ,thank youa straight forward answer, thank you
-------------------- 875.0gt 90dtlx5.0 93blkvenumos5.0COBRA#3377 96redthundr4.6l4vCOBRA 964.6l2vGT 895.0lGT 93cleancorlgreen5.0GT 93meancoralgreen5.0GT
Posts: 1830 | From: 707 vacaville ca | Registered: Aug 2008
| :
|
|
MUSTTANGUY
¯
Member # 2251
|
posted
I have seen 8.8 Mustang rearends installed in numorous vehicles. Don't worry about the 4 link setup. Measure the width from axle flange to axle flange. If dimension is acceptable cut the spring purches from original rearend and weld onto the 8.8 in same location (perch width) and bolt in.
-------------------- Tim (Musttanguy) 97 5.0 coupe 82 GT 427/T56/9"
Posts: 1690 | From: Lodi | Registered: Dec 2002
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
an explorer or ranger rear end is much easier to swap in.
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
rollin5ive0
¯
Member # 8592
|
posted
much appreciated
-------------------- 875.0gt 90dtlx5.0 93blkvenumos5.0COBRA#3377 96redthundr4.6l4vCOBRA 964.6l2vGT 895.0lGT 93cleancorlgreen5.0GT 93meancoralgreen5.0GT
Posts: 1830 | From: 707 vacaville ca | Registered: Aug 2008
| :
|
|
NightmareB4Xmas_68
¯
Member # 6371
|
posted
quote: Originally posted by Blind: an explorer or ranger rear end is much easier to swap in.
was gonna post this.. my buddy has a 71 comet with the explorer rear jus welded the spring perches. 31 spline 3.55 and disc. cantr beat it from pick and pull
-------------------- One day it'll get finished
Posts: 827 | From: OAKLAND,CA | Registered: Jan 2006
| :
|
|
Venomousnotch
¯
Member # 8695
|
posted
quote: Originally posted by MUSTTANGUY: I have seen 8.8 Mustang rearends installed in numorous vehicles. Don't worry about the 4 link setup. Measure the width from axle flange to axle flange. If dimension is acceptable cut the spring purches from original rearend and weld onto the 8.8 in same location (perch width) and bolt in.
The man said it all....
-------------------- 🏁•2004 MUSTANG SVT COBRA•🏁
"WHEN THE WHINING STARTS,IT MEANS JUSTICE IS ABOUT TO BE SERVED"..
Posts: 7605 | From: *NORTHERN*KILLA4NIA* | Registered: Oct 2008
| :
|
|