This is topic clutch pack install ??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=025514
Posted by JZTRK (Member # 7641) on :
 
whos kit are you guys using and are you doing the f150 s spring
 
Posted by 68stanger (Member # 7842) on :
 
"stock" NON carbon fiber frictions, stacked like newer style factory, shimmed tight and used a f150 s-spring [burnout] [burnout]

edit - Ford Racing track loc rebuild kit fms 4700-b

[ October 28, 2011, 12:39 AM: Message edited by: 68stanger ]
 
Posted by clone nprogrss (Member # 10342) on :
 
same kit 68 stanger mentioned an a f150 s spring will have u wit great posi!!!
 
Posted by Santos1986gt (Member # 10513) on :
 
Is that on any f150 or does it has to be a specific year?
 
Posted by clone nprogrss (Member # 10342) on :
 
quote:
Originally posted by Santos1986gt:
Is that on any f150 or does it has to be a specific year?
dnt think there is a specific year but its hit n miss with lookin for em @ pnp.last time i went lookin for one i opened damn near 12 rearends an i was only able to locate 4 trucks with them.not to mention the other 5 that were opened up an stripped already. just dnt bother lookin at 8 lug trucks. damn near any f150 that rearend isnt opened give it a try.an bring u a hammer an punch cause im pretty sure you'll find a few opened up already wit a bolt to the pin broke off!good luck
 
Posted by JZTRK (Member # 7641) on :
 
is this a simple repair? i can tear a motor apart and reassemble it with my eyes closed i just have not dealt with rear ends other than swapping them to 5 lug ranger axles
 
Posted by 915.0gt (Member # 9518) on :
 
Fuck the f150 s spring, 99 bucks for the cobra carbon fiber clutch paks for the s spring all it is, is poping the cover off snd smacking the spring out if I remember right. U don't think u have to pull the c clips to get the spring. But a full trak-loc rebuild is just as easy.

[ October 29, 2011, 02:48 PM: Message edited by: 915.0gt ]
 
Posted by LXjames (Member # 10791) on :
 
Where can I get the cobra clutch packs and f150 spring?
 
Posted by Santos1986gt (Member # 10513) on :
 
quote:
Originally posted by 915.0gt:
Fuck the f150 s spring, 99 bucks for the cobra carbon fiber clutch paks for the s spring all it is, is poping the cover off snd smacking the spring out if I remember right. U don't think u have to pull the c clips to get the spring. But a full trak-loc rebuild is just as easy.
Yeah i know about the carbon kit but if I can upgrade basically for free just pay entrance fee at pick n pull and pocket spring. Can't beat that price.
 
Posted by clone nprogrss (Member # 10342) on :
 
quote:
Originally posted by 915.0gt:
Fuck the f150 s spring, 99 bucks for the cobra carbon fiber clutch paks for the s spring all it is, is poping the cover off snd smacking the spring out if I remember right. U don't think u have to pull the c clips to get the spring. But a full trak-loc rebuild is just as easy.
you hollerin fuck the f150 s spring but i heard the carbon clutches come with the f150 s spring!
 
Posted by Santos1986gt (Member # 10513) on :
 
Will the f159 s-spring drop rite in my 86 rear. Also were can I get the schematic for the newer clutch pak! Lmk thanks.
 
Posted by 68stanger (Member # 7842) on :
 
quote:
Originally posted by Santos1986gt:
Will the f159 s-spring drop rite in my 86 rear. Also were can I get the schematic for the newer clutch pak! Lmk thanks.
what do you mean by schematic...if your talking about how to stack them in the differential (newer fords) its,
steel - disc - steel - steel - disc - steel - disc - shim.
 
Posted by Santos1986gt (Member # 10513) on :
 
quote:
Originally posted by 68stanger:
quote:
Originally posted by Santos1986gt:
Will the f159 s-spring drop rite in my 86 rear. Also were can I get the schematic for the newer clutch pak! Lmk thanks.
what do you mean by schematic...if your talking about how to stack them in the differential (newer fords) its,
steel - disc - steel - steel - disc - steel - disc - shim.
+1 that's igsacly what I ment. Thanks.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com