This is topic noise when cluych pedel press in 93 mustang t5 in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=025314
Posted by FOXX5.0 (Member # 9094) on :
 
So it happened after I was racing a friend of mine I missed 4th real bad LOL any ways.. 5 min later I hear a crazy sound every time i press my clutch pedel in and it feels not rite it goes in to gear drives but only wen I press the pedel in sounds like a screaming noise/winneing idk lmk cafords need this fix ASAP its my DD HELP thanks guys [patriot] its a 93 mustang. Gt t5
 
Posted by FOXX5.0 (Member # 9094) on :
 
Excuse my spelling I'm posting off my fone LOL
 
Posted by Camara90 (Member # 134) on :
 
probably bad throwout bearing.
 
Posted by Q8_Hatch (Member # 11265) on :
 
^^^ +100
 
Posted by FOXX5.0 (Member # 9094) on :
 
Sounds like this
http://www.youtube.com/watch?v=n-jWyrM71Ow&feature=youtube_gdata_player
How much is it to replace that if it is the throw out bearing? Thanks for the quick responds [patriot]
 
Posted by FOXX5.0 (Member # 9094) on :
 
Sounds like this
http://www.youtube.com/watch?v=n-jWyrM71Ow&feature=youtube_gdata_player
How much is it to replace that if it is the throw out bearing? Thanks for the quick responds [patriot]
 
Posted by Catfish (Member # 9529) on :
 
It's pretty easy actually. The bellhousing (Clutch,flyywheel,Press. Plate) can all stay attached and on the car.

Remove the Driveshaft, Shifter boot, and the 4 bolts holding shifter on.

Remove the 4 or is it 5 bolts that attach the trans to the Bellhousing and pull the clutch fork out and the TOB is attached to it. Replace and slap back in, can be done in around 2 hours.
 
Posted by sydewayzLX50 (Member # 10217) on :
 
Throwout bearing, possibly pilot bearing
 
Posted by SLOWSN95 (Member # 8269) on :
 
It sounts like a TOB.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com