This is topic what you think in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=025146
Posted by p5.0 (Member # 6160) on :
 
Ok here's what I got. 306 short block , Afr 185's heads with 1.7 stud mount rockers and paxton supercharger 8 psi. It's for a carb setup. What cam should I go with ? B cam. And victor Jr intake? also were can I get a blow through carb that will work with the setup. And fuel pump which one. Thanks cafords
 
Posted by sydewayzLX50 (Member # 10217) on :
 
i would think a b-cam is kinda small for that setup. i personally cany recommend a good one for you but i think you could find something more suitable for that combo than a b-cam
 
Posted by p5.0 (Member # 6160) on :
 
would a f cam be to big with the 1.7rockers. or should i go the trick flow stage 1 if the b cam is to small.
 
Posted by 95gtdrop (Member # 7478) on :
 
i would think an f cam would be fine, the tfs cam or just get a custom ground one from comp cams [patriot]
 
Posted by 2BlueGeeTees (Member # 4702) on :
 
Holley black fuel pump a Holley blow thru carb and if you really want a ford cam than stick with an F cam as far as the rockers make sure you check piston to valve clearance with a check spring installed. However custom cams for a pushrod are really not that much more expensivethan an OTS cam
 
Posted by 70mach351 (Member # 7528) on :
 
csu makes a good blow through carb, i ran a quick fuel for my last one and then coverted it to efi. Warhorse has it now and it runs like a champ. id stay away from the holley brand or demon blow though carbs. THere is a few on yellow bullet and corral right now for sale for 400 or so.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com