This is topic 302 build question in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=024733
Posted by Tony Montana (Member # 8288) on
:
I have a 68 302 j code motor im starting a rebuild on. Im interested in running a hydraulic flat tappet cam with .488 int and .488 exh.Duration 284 284. For the meantime i plan on throwing in some gt40 heads would this combo work? Im not looking for a ton of power just something to bump performance .
[ June 20, 2011, 05:06 PM: Message edited by: Tony Montana ]
Posted by turbo50 (Member # 6700) on
:
Should run good. If that is the summit cam it is actaully made by comp cams which is pretty decent.
Posted by Tony Montana (Member # 8288) on
:
Thanks for the advice its actually an Erson i just ran across a deal for it some lunati lifters and pushrods as a combo. I just wanted to hear soem opinions before i close the deal.
Posted by ISP89LX (Member # 8949) on
:
Any info just ask dan aka TURBO50, always give great advice and will be realistic with you...hes very good with his builds and knows his windsor's...
Fueled by Ford Mustang Owners
on CaliforniaFords.com