This is topic How much horsepower do I have. in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=024491
Posted by Santos1986gt (Member # 10513) on :
 
I have a 86 Gt with e7 heads,e303 cam,gt40p upper & lower with 75 mm throttle body with egr spAcer,bbk cold air intake, electric fan no smog pump,ac delete,smaller under drive pullys,bbk equal lengths headers. How much horses you think I have. Send me some pm
 
Posted by 707notchback jaejae (Member # 7958) on :
 
237.9
 
Posted by sneakyfox90 (Member # 9379) on :
 
nothin worth mentioning lol jk but foreal a stock fox could prolly still hang wit u all day

[ May 17, 2011, 12:35 AM: Message edited by: sneakyfox90 ]
 
Posted by Ryan_LX (Member # 7089) on :
 
205 to the wheels

[ May 17, 2011, 12:20 AM: Message edited by: Ryan_LX ]
 
Posted by turbo50 (Member # 6700) on :
 
190 to the wheels
 
Posted by peter (Member # 10411) on :
 
dont listen to these guys!! thats high performance stuff bro 400hp+ lol jkjk probably like 230whp
 
Posted by cali95gt (Member # 8940) on :
 
Not a lot and no where near enough [Cool]
 
Posted by SHORTSHIFTER89 (Member # 7810) on :
 
Tear it down and start over kid. sounds like your going the route many of us went. BACKWARDS BEFORE WE GOT IT RIGHT. good luck
 
Posted by Santos1986gt (Member # 10513) on :
 
Well thanks. And yeah I rebuilt it the engine myself. I have some gt40 heads in the shop their doing 3angle valve cuts. And 1.7 rockers & 24lb injectors how much increase of power & torque with that set up?
 
Posted by SnakeBit (Member # 8871) on :
 
quote:
Originally posted by Santos1986gt:
Well thanks. And yeah I rebuilt it the engine myself. I have some gt40 heads in the shop their doing 3angle valve cuts. And 1.7 rockers & 24lb injectors how much increase of power & torque with that set up?
Hey I got some Crane 1.7 rockers with hardware for $100 if your interested.

LMK
 
Posted by Santos1986gt (Member # 10513) on :
 
Well thanks. And yeah I rebuilt it the engine myself. I have some gt40 heads in the shop their doing 3angle valve cuts. And 1.7 rockers & 24lb injectors how much increase of power & torque with that set up?
 
Posted by CobramanPhil (Member # 2170) on :
 
Nothing wrong with the stock setup (you guys commenting are spoiled;) ). If you are going with ported gt40 then you might get 10-20rwhp (just a guess). If I were you I would make sure the suspension is down first and if not already grab some gears(at least these are mods you can feel right away).
 
Posted by Santos1986gt (Member # 10513) on :
 
I have 355 gears coil over in the front & regular in back basically stock. But I do want to rebuilt my diff with carbon fiber clutches. Or should I go bigger gears. Stock t5 tranny.
 
Posted by hidnn.o.s. (Member # 1219) on :
 
Internet dyno, LMFAO [patriot]
 
Posted by 2TONE (Member # 4216) on :
 
quote:
Originally posted by hidnn.o.s.:
Internet dyno, LMFAO [patriot]
lol
 
Posted by 94droptopGT (Member # 4992) on :
 
quote:
Originally posted by 2TONE:
quote:
Originally posted by hidnn.o.s.:
Internet dyno, LMFAO [patriot]
lol
hahahahaha n00b
 
Posted by East Bay 50 (Member # 8081) on :
 
under 200rwhp. Im guessin 195rwhp tops!
 
Posted by Santos1986gt (Member # 10513) on :
 
No a stock 50 86 has 195hp 200 torque. And a 87-93 have 220-225 with the e7 heads. With the upper and lower with bbk 75mm throttle body full exhaust,cam.bbk cold air intake I converted my 86 into 87 and up. I Also put the pistons with valve cuts on them. So I should hopefully be running 235-240 hp. I just wanted somebody elses apinnion. But I don't know were my torque is at.
 
Posted by turbo50 (Member # 6700) on :
 
quote:
Originally posted by Santos1986gt:
No a stock 50 86 has 195hp 200 torque. And a 87-93 have 220-225 with the e7 heads. With the upper and lower with bbk 75mm throttle body full exhaust,cam.bbk cold air intake I converted my 86 into 87 and up. I Also put the pistons with valve cuts on them. So I should hopefully be running 235-240 hp. I just wanted somebody elses apinnion. But I don't know were my torque is at.
Dude a good running stock 5.0 will make about 205-218 at the wheels.

Ill bet you a 6 pack of your favorite beer that you dont make more than 220 at the wheels.

Put some damn heads on that thing it will REALLY wake it up!

Here is some real world testing, but note, they start with a NEARLY impossible to find nowadays 120K mile motor.

Your E cam with those old worn out valve springs on your NON E7 heads (worse than E7s even!)

http://www.dfwstangs.net/forums/archive/index.php/t-25409.html


Dan

[ May 18, 2011, 05:07 PM: Message edited by: turbo50 ]
 
Posted by wilit (Member # 3367) on :
 
quote:
Originally posted by turbo50:
quote:
Originally posted by Santos1986gt:
No a stock 50 86 has 195hp 200 torque. And a 87-93 have 220-225 with the e7 heads. With the upper and lower with bbk 75mm throttle body full exhaust,cam.bbk cold air intake I converted my 86 into 87 and up. I Also put the pistons with valve cuts on them. So I should hopefully be running 235-240 hp. I just wanted somebody elses apinnion. But I don't know were my torque is at.
Dude a good running stock 5.0 will make about 205-218 at the wheels.

Ill bet you a 6 pack of your favorite beer that you dont make more than 220 at the wheels.

Put some damn heads on that thing it will REALLY wake it up!

Here is some real world testing, but note, they start with a NEARLY impossible to find nowadays 120K mile motor.

Your E cam with those old worn out valve springs on your NON E7 heads (worse than E7s even!)

http://www.dfwstangs.net/forums/archive/index.php/t-25409.html


Dan
Awesome link!
 
Posted by Santos1986gt (Member # 10513) on :
 
My e7 heads are rebuilt. My motor only has 3k miles I just rebuilt with new bearings,piston rings, seals ,clutch.
 
Posted by turbo50 (Member # 6700) on :
 
quote:
Originally posted by Santos1986gt:
My e7 heads are rebuilt. My motor only has 3k miles I just rebuilt with new bearings,piston rings, seals ,clutch.
If you didnt change the pistons then its even more of a kick in the nuts cuz you lost nearly a point in compression.

Basically have a bronco motor with a cam/intake and exhaust now.
 
Posted by Santos1986gt (Member # 10513) on :
 
I have 89 pistons. Is that still lossing compression.
 
Posted by 2TONE (Member # 4216) on :
 
180hp
 
Posted by turbo50 (Member # 6700) on :
 
quote:
Originally posted by Santos1986gt:
I have 89 pistons. Is that still lossing compression.
No.

But in your post you said you ad a 86 gt with E7 heads, nothing about the 87-92 pistons...
 
Posted by Santos1986gt (Member # 10513) on :
 
So what's the difference about those pistons other than the valve clearance cuts?
 
Posted by turbo50 (Member # 6700) on :
 
quote:
Originally posted by Santos1986gt:
So what's the difference about those pistons other than the valve clearance cuts?
Different compression height to obtain the same 9.2:1 compression rating with a 62-65cc head (86 heads) as the later 87 and up 5.0 motors.
 
Posted by Santos1986gt (Member # 10513) on :
 
Ok thanks
 
Posted by Built90GT (Member # 10758) on :
 
quote:
Originally posted by Santos1986gt:
I have a 86 Gt with e7 heads,e303 cam,gt40p upper & lower with 75 mm throttle body with egr spAcer,bbk cold air intake, electric fan no smog pump,ac delete,smaller under drive pullys,bbk equal lengths headers. How much horses you think I have. Send me some pm
Not enough buy some heads and a supercharger [patriot]
 
Posted by Santos1986gt (Member # 10513) on :
 
I don't want a charger. Straight motor. I just what to blow doors off ss camaros
 
Posted by Pure Stang (Member # 7251) on :
 
Even with the gt 40's u will get a run for ur money. Especially with a ecam and that intake. Rethink ur combo.
 
Posted by Santos1986gt (Member # 10513) on :
 
I could only afford gt40 rite now

[ May 19, 2011, 11:16 PM: Message edited by: Santos1986gt ]
 
Posted by Pure Stang (Member # 7251) on :
 
Unless u get some nitrous u won't be blowing the doors off maros lol. Gears and slicks from a launch it would be close.
 
Posted by East Bay 50 (Member # 8081) on :
 
quote:
Originally posted by Santos1986gt:
I don't want a charger. Straight motor. I just what to blow doors off ss camaros
your basically stock foxbody motor will not even beat an LT1 camaro much less an LS1. basically your shit is slow...
 
Posted by Santos1986gt (Member # 10513) on :
 
Yeah I know. I really want to go 331
 
Posted by 92MaroonGT (Member # 10397) on :
 
Dan, it's 11:15pm and you made me laugh.
 
Posted by Santos1986gt (Member # 10513) on :
 
Why
 
Posted by hilltim54 (Member # 10655) on :
 
quote:
Originally posted by turbo50:
quote:
Originally posted by Santos1986gt:
No a stock 50 86 has 195hp 200 torque. And a 87-93 have 220-225 with the e7 heads. With the upper and lower with bbk 75mm throttle body full exhaust,cam.bbk cold air intake I converted my 86 into 87 and up. I Also put the pistons with valve cuts on them. So I should hopefully be running 235-240 hp. I just wanted somebody elses apinnion. But I don't know were my torque is at.
Dude a good running stock 5.0 will make about 205-218 at the wheels.

Ill bet you a 6 pack of your favorite beer that you dont make more than 220 at the wheels.

Put some damn heads on that thing it will REALLY wake it up!

Here is some real world testing, but note, they start with a NEARLY impossible to find nowadays 120K mile motor.

Your E cam with those old worn out valve springs on your NON E7 heads (worse than E7s even!)

http://www.dfwstangs.net/forums/archive/index.php/t-25409.html


Dan
Hey Dan, great link man! Im bookmarking that page
[Big Grin]
 
Posted by 95gtdrop (Member # 7478) on :
 
100RWH

get it fucking dyno'd !!


this thread is a FAIL!!!!!
 
Posted by Santos1986gt (Member # 10513) on :
 
quote:
Originally posted by 95gtdrop:
100RWH

get it fucking dyno'd !!


this thread is a FAIL!!!!!
This post is 3 months old. Why don't you next time read the dates before you send me a bullshit reply like that. Ok you Internet warrior!
 
Posted by SLOWSN95 (Member # 8269) on :
 
You can only afford GT40s yet your getting a 3 angle valve job? You're only wasting money that could have been easily put towards some aluminum heads. Save up and buy some good aftermarket parts.. you'll thank yourself later.
 
Posted by Santos1986gt (Member # 10513) on :
 
Yeah I know that's why I'm going with a new set up. I'm almost their I'm going to buy alumm heads from my friend. Thanks though.
 
Posted by 95gtdrop (Member # 7478) on :
 
quote:
Originally posted by Santos1986gt:
quote:
Originally posted by 95gtdrop:
100RWH

get it fucking dyno'd !!


this thread is a FAIL!!!!!
This post is 3 months old. Why don't you next time read the dates before you send me a bullshit reply like that. Ok you Internet warrior!
dude even if it was a year ago, id still clown. dont post dumb shit and i wont post smart ass remarks.
 
Posted by Santos1986gt (Member # 10513) on :
 
Who da fuck ar you to clown on ppl what gives you the right. You dont know who I am or what I'm capable of doing. That was just a simple fucken question. Like I said your nothing but a Internet warrior. By the way I will smoke your cobra All day with my 04 terminator. Any time. I'll even give my address if you want to see about something!!

[ August 18, 2011, 04:32 PM: Message edited by: Santos1986gt ]
 
Posted by Farrell (Member # 10801) on :
 
Take a deep breath man, its the internet and not worth getting all worked up about. I have yet to hear anyone clown in person, face the face, to a stranger the way they do online. just gotta laugh it off and see who actually talks sh*t at a meet.
 
Posted by Santos1986gt (Member # 10513) on :
 
Your rite man. Thanks. So when is the next big meet I'll deffinetley be their.
 
Posted by Farrell (Member # 10801) on :
 
No problem, I was the same way, took everything as if someone were saying it to my face, just isn't worth it....as far as meets, if you're around sat evening come out to eastride. We got a meet going on from 6:30-8 by macaroni grill there. Should be good times.
 
Posted by 95gtdrop (Member # 7478) on :
 
quote:
Originally posted by Santos1986gt:
Who da fuck ar you to clown on ppl what gives you the right. You dont know who I am or what I'm capable of doing. That was just a simple fucken question. Like I said your nothing but a Internet warrior. By the way I will smoke your cobra All day with my 04 terminator. Any time. I'll even give my address if you want to see about something!!
the first amendment gives me the right. And your right i dont know who you are or what your capable of. whats funny is you dont know who i am or what im capable of. so you should shut up when trying to come off as some bad ass guy. as far as i know your a 16 year old school girl. i would hope that your 04 terminator would smoke me all day long and every which way to sunday. if it didnt it would be due to a bad driver ie you. i love how easy i just got to you. cry about it some more. i dont get the warrior part. i never made threat i just said to get a fucking tune!

hope your not mad at me hahahahaha


IBTL lol

[ August 18, 2011, 07:28 PM: Message edited by: 95gtdrop ]
 
Posted by Farrell (Member # 10801) on :
 
How about we all get over it. A lot bigget shit in life to worry about than some posts on the internet. We all know the interbet is serious business man!
 
Posted by Farrell (Member # 10801) on :
 
.

[ August 18, 2011, 08:51 PM: Message edited by: Farrell ]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com