This is topic please read..what cam to go with on my setup?? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=024449

---

Posted by 87LXblackpearl (Member # 10409) on :
 
so like the title says i have a 1989 mustang lx..im planning on putting sum gt40 heads on with cobra upper and lower it has 4.10's in the rear so what cam will be best for my setup b cam or e cam???
 

---

Posted by clone nprogrss (Member # 10342) on :
 
im basically gonna b running the same set up u want to but i went with the b303 cam!!i hear the e303 has surging problems!!im sure sum1 will elaborate a bit on that issue!!
 

---

Posted by 87LXblackpearl (Member # 10409) on :
 
so e303 has surging issues/? oh well i really wanna go with b cam anyways with performs better??
 

---

Posted by turbo50 (Member # 6700) on :
 
id go with the b cam maybe 1.7 on the exhaust
 

---

Posted by 87LXblackpearl (Member # 10409) on :
 
what is 1.7 on the exaust???
 

---

Posted by lucius50fox (Member # 10791) on :
 
i think hes referencing the rocker arms ratio. basically your exhaust valve goes down farther
 

---

Posted by 87LXblackpearl (Member # 10409) on :
 
ok so from what i kno,the b cam can run with 1.6 not 1.7 because it might go thru the valve cover..??am i rite or wrong?? just dont wanna get the wrong cam with my setup..remember i have 4.10's in my rear end..also should i even get roller rockers or should i just use the stock rockers??please give me some usefull advice thanks alot caFords..
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com