This is topic exhaust manifold gaskets??? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=024397
Posted by a302juGRnuat (Member # 10163) on
:
i have edelbrock rpm heads and bbk longtubes...which exhaust manifold am i suppose to get??? edelbrock or bbk's???
Posted by OneFastNotch. (Member # 9537) on
:
id go with copper gaskets.
Posted by 707notchback jaejae (Member # 7958) on
:
i use the ones with the metal screen..i also like the ones that melt thru the first heat cycle..
Posted by 84SVOrick (Member # 9039) on
:
I use the crushable ones, went thru a few styles b4 i found them
Posted by 68stanger (Member # 7842) on
:
any of the "dead soft" aluminum gaskets, costs around $30 for a set. never had any sealing issues. a have reused them and they still mayde a good seal that lasted(I used bbk headers)
Posted by a302juGRnuat (Member # 10163) on
:
thanks for the replies...copper ones sound real nice. sounds expensive too
Posted by OneFastNotch. (Member # 9537) on
:
they are expensive. but let me tell you i havnt changed my header gaskets since i owned the car :]
Fueled by Ford Mustang Owners
on CaliforniaFords.com