will a t5 yoke fit on a classic mustang driveshaft?

This is topic will a t5 yoke fit on a classic mustang driveshaft? in forum Tech Talk at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=024283

Posted by LUCKY 187 (Member # 4347) on :

Doing my t5 swap and found converted driveshafts for $ 550 but I measure this driveshaft and it is the same length. Can I put one off a 5.0?

Posted by 70mach351 (Member # 7528) on :

you will need to change the 8.8 flange toe a 9 inch one for the rear if thelengths are the same

Posted by Secnd2nun64 (Member # 1431) on :

What length driveshaft do you need? I have a steel one that I use to use before I got an aluminum one. I had it made for a t5 coversion in my 64 1/2.

Posted by tangerine67 (Member # 8071) on :

quote:
Originally posted by LUCKY 187:
Doing my t5 swap and found converted driveshafts for $ 550 but I measure this driveshaft and it is the same length. Can I put one off a 5.0?

yes sir u can use it ...all u need is the u joints that are slighty different in size .... i forget which ones are bigger/smaller ...u can tell by sizing em up....any auto parts store has them. i did it on my 67 .. took it to San Jose Driveline ...they switched the u joints and balanced it for me

[ April 18, 2011, 03:30 PM: Message edited by: tangerine67 ]

Fueled by Ford Mustang Owners
on CaliforniaFords.com