This is topic fuel pump install/ now pump doesnt turn on ... in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=024239
Posted by trickflow211 (Member # 8503) on
:
I installed a new 255 pump into my 5.0 fox ... also had to install a new harness because mine was all coroded from gasoline eatijg it away ... so after I installed new pump and put tank back up when I try to start car it won't start and fuel pump doesn't turn on ... I am going to drop it again today but wat should I look for or test cus I'm pretty sure I hooked everything up correctly ... could my relay switch some how went out even tho it was working before I dropped it ?! Thanks guys !
Posted by tribal3579warrior (Member # 5663) on
:
Check your fuel pump cutoff switch in the trunk.
Posted by 68stanger (Member # 7842) on
:
check if your actually getting power to the pump first, if not start working your way up front to find the source (relay, bad connections etc).
Posted by trickflow211 (Member # 8503) on
:
Sorry forgot to state that car was running before I took pump out
Posted by Duncan Motors (Member # 7045) on
:
above help is on point
Posted by Sic Beast (Member # 6771) on
:
Check your inertia switch n the trunk.
Same exact thing happened to me...had power but pump wasn't priming and for some reason I changed the switch and that was it.
Posted by trickflow211 (Member # 8503) on
:
Where would the relay be ?! I have tried two different pumps and they are both not turning on when I turn key ...wat should I check for now ?!
Posted by trickflow211 (Member # 8503) on
:
Where is switch in trunk located ?!
Posted by 79 cobra (Member # 10137) on
:
take of the plastic piece in the trunk and its a lil black box with red button
Posted by lucius50fox (Member # 10791) on
:
chad this james, after all that shit it still didnt run?????fuck
Fueled by Ford Mustang Owners
on CaliforniaFords.com