This is topic What should I do next? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=024237
Posted by 93ChpLuu (Member # 10787) on :
 
I want to do some thing else to my car performance wise but trying to stay under like $800 or so. i got a 93 xchp 5 spd Centerforce dual friction clutch, cobra upper/lower, 70mm throttle body, headers, x-pipe no cats, msd everything, e303 cam, c&l air intake....i got 24pound injectors but not yet installed, I dont see no point on putting them on since I dont have serious performance parts in my car. Its still stock besides what i mentioned. Any advice would be appreciated thanks everyone.
 
Posted by nasty93 (Member # 8935) on :
 
id slaps some gears on that ride if u dont already have them...or some better heads.
 
Posted by 50Reasons (Member # 6452) on :
 
quote:
Originally posted by nasty93:
id slaps some gears on that ride if u dont already have them...or some better heads.
+1 on gears unless you have some then buy some heads
 
Posted by 93ChpLuu (Member # 10787) on :
 
Yea i was thinking on doing the gears next but was not sure. im goin with some 373's....
 
Posted by 93ChpLuu (Member # 10787) on :
 
What kind of heads should I be looking out for so i can have an idea? and around how much $$$ do they run for?
 
Posted by gercolla1 (Member # 3068) on :
 
gears,quality shocks and struts [patriot]
 
Posted by 93ChpLuu (Member # 10787) on :
 
I got some red Koni's all the way around
 
Posted by Stang66 (Member # 10504) on :
 
3.27s.. fuel is to expensive:D
 
Posted by lucius50fox (Member # 10791) on :
 
what do you want to do with the car? i say get a tubular k memeber and schocks and struts. it all depends on what your purpose is for your car
 
Posted by SmokinLX (Member # 1684) on :
 
With stock piston's You should go with some used twisted wedge heads next and then gear's.
 
Posted by 93ChpLuu (Member # 10787) on :
 
I wont be going to the track or anything like that. I use it as a daily driver and sometimes it gets tempting to go at it with some one next to you on the road, i just want to have a strong running car if any thing like that happens
 
Posted by 94 N.C.F. GT (Member # 3946) on :
 
Go with 373's and never look back [patriot]
 
Posted by cali95gt (Member # 8940) on :
 
used Edelbrock Performer heads $500-600
New set of gears W/ install part (track lok rebuild, etc..) $340 from Summit

Then $250 for T-top50 to install them.. its about a total of $1100 but it would make a night and day difference... buy the parts now and save for install later
 
Posted by sydewayzLX50 (Member # 10217) on :
 
subframe connectors, gears & rebuild trac-loc in that order IMO
 
Posted by 93ChpLuu (Member # 10787) on :
 
yea thanks for all the info guys...ima get the gears done and also be on the look out for some heads too for a good price...
 
Posted by sydewayzLX50 (Member # 10217) on :
 
SUBFRAME CONNECTORS NEXT YOULL THANK ME LOL
 
Posted by 93ChpLuu (Member # 10787) on :
 
subframe connectors? whats the benefit on those?
 
Posted by sydewayzLX50 (Member # 10217) on :
 
Completes the frame from front to back. Get better traction, handling, helps keep the car from slowly turning into a big accordion and keeps the floorpan from sinking and the seats falling through the floor. Drives like a whole new car with them in, more stable and predictable
 
Posted by 93ChpLuu (Member # 10787) on :
 
ohh ok never really thought about all that...there not that expensive either...thanks for the info
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com