This is topic 01 seat swap into a fox in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=024163

---

Posted by Bronconut (Member # 10716) on :
 
Hey, trying to figure out what I need to do to swap in some 01 seats in my 90 hatch. I have tried searching and haven't found the info I'm looking for. Sounds like the fronts are straight bolt up with using my seat tracks. But, what about the rear seats? Will it fit? What do I need to do to swap it in?

Thanks
 

---

Posted by JohnB (Member # 969) on :
 
Fronts will bolt right in, but they will sit a lot higher than stock. You can swap the tracks over to keep them low. The rears will take some work to make them fit. Is it a Coupe or Hatch?
 

---

Posted by ddarkslayer (Member # 10688) on :
 
you will sit about 4 inches higher

I saw a thread on modded mustangs where some guy snagged seats out of GT 500 and swapped in his fox.
 

---

Posted by Bronconut (Member # 10716) on :
 
Thanks guys. This is for a hatch. So if I swap over the tracks from my front seats it will still sit a little bit higher?

Anyone know what exactly needs to be done to the rear seat? Is the width the same?
 

---

Posted by Bronconut (Member # 10716) on :
 
Just searched corral and found this for anyone else looking to swap seats.

http://forums.corral.net/forums/general-mustang-tech/537531-2002-seats-1991-gt-how-get-them.html

Corral link
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com