This is topic PBR calipers on 94-98 spindles in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=024109

---

Posted by triple black hatch (Member # 5420) on :
 
Would the calipers bolt right on?
 

---

Posted by sydewayzLX50 (Member # 10217) on :
 
You have to grind about 1-2 mm of metal from the spindle for it to clear. Google it theres a lot of pics of where to grind it.
 

---

Posted by triple black hatch (Member # 5420) on :
 
Thanks I'll check it out
 

---

Posted by tribal3579warrior (Member # 5663) on :
 
I have 2003 Cobra brakes installed on 1995 mustang spindles and didn't have to grind anything off. It bolted right up with no fitment issues. Maybe there are spindles that does and some that doesn't(?). I found something for you anyways in case you need to.

http://www.allfordmustangs.com/Detailed/2009.shtml
 

---

Posted by Musttanguy (Member # 2251) on :
 
94-98 are different spindles
94-95 with curved steering arm has a rough casting that in most cases needs to be clearanced for installation of either 99+ PBR or Cobra/Bullitt/Mach1 calipers.
96-98 Has enough clearance for a direct bolt on.
Some of the 94/95 spindles require more clearancing while some require less as there is a large variance in castings.
I have clearanced ALOT of the 94/95 spindles (about 50 sets) for the sets I sell.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com