This is topic how wide slick can i go on 10 holes? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=023915
Posted by 85staNg302 (Member # 9450) on :
 
how wide slick i can run on 10 holes and how tall shuld i use ? stock 5.0 full exhaust 355z few bolt ons .lmk
 
Posted by 90FoX (Member # 1974) on :
 
I was able to fit 275 bfg dr's, not sure how tall you wanna go
 
Posted by 79 cobra (Member # 10137) on :
 
i had 27/10/15 on mine with noo problem
 
Posted by 85staNg302 (Member # 9450) on :
 
^ did it bubble alot wit them 275s? what are 10holes 15 by what??
 
Posted by 90FoX (Member # 1974) on :
 
quote:
Originally posted by 85staNg302:
^ did it bubble alot wit them 275s? what are 10holes 15 by what??
oh ya it bubbled a lot...not sure the width on the ten holes..
 
Posted by Pure Stang (Member # 7251) on :
 
Ten holes are 7 inches wide. I had 275/50/15 mr drs that's the
Biggest you can go it did bulg I little bit. Just set it at 15-17 psi and launch the shit out of it lol. That's what I did was getting 1.7 60's on pretty much stock suspension
 
Posted by warhorse58gt (Member # 7702) on :
 
why not run a 27x8 slick? i'm only on a 9inch and my car can run 1.42-1.46's 60ft's.. it's not just about tire size.. it's about the contact patch on the ground.. if you put to big of a tire on that rim. it's just going to cup your tread patch.. and that is not good for traction. [patriot]

edit.. have been 11.004 @ 124 on a 235/60/15 mt dr's with the best 60ft of 1.46.. just a thought.. bigger isn't always the best way.. [Wink]

[ February 22, 2011, 11:48 AM: Message edited by: warhorse58gt ]
 
Posted by Pure Stang (Member # 7251) on :
 
War what are your suspension mods?
 
Posted by 85staNg302 (Member # 9450) on :
 
quote:
Originally posted by Pure Stang: War what are your suspension mods?
Mine is all stock bt im ordering mm lower controll amrs n uppers..oe bushings..what size ya recommand me to get? i need em by tomarrow so lmk thanks .
 
Posted by Pure Stang (Member # 7251) on :
 
these are the ones i just ordered. 26/10.5/15 they are going on ten holes and minimum requirement is 7 inches which the ten holes are.
 
Posted by ddarkslayer (Member # 10688) on :
 
if you wanna go bigger I recommend getting MM adjustable lower control arms
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com