This is topic speed density mods??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=023430
Posted by 89 306 (Member # 9042) on :
 
I have an 87 speed density lokin for upgrades to put it in the mid to low 13s. I knw gears and exhuast is a start. I have 373s in mind but wat else can i get to get this car to run those numbers car is completely stock!! With 53k original miles. Thanks for the help guys
 
Posted by 87droptop50 (Member # 7185) on :
 
1st mod ... Convert to mass air ...
 
Posted by Blind (Member # 3052) on :
 
slicks, gears, short belt, weight reduction.


don't convert to mass air until you make a mod that changes the vacuum, like a larger cam, otherwise the SD makes more power than a stock MAF setup.
 
Posted by carajo (Member # 4426) on :
 
nitrous= [Big Grin]
 
Posted by 89 306 (Member # 9042) on :
 
So far on the upgrade list is

1 5/8 bbk shorty headers
bbk catless x pipe
373 gears
slicks/ drag radials
also gana get som lowerin springs nd controll arms

any suggeations on advancing timing or any other suggestions on makin this thing faster

i hav an 89 wit a built 306 h/c/i. That mayb thinkin of swapin over if i dont get it fast enough with basic mods. Wat u guys think???
 
Posted by copcar (Member # 10113) on :
 
1st mod. Torque box reinforcement.
 
Posted by Moderator (Member # 6395) on :
 
I had to convert to mass air when I did my gt40s and I love them
 
Posted by 89 306 (Member # 9042) on :
 
I have a 306 with edelbrock heads milled 30 thousands gt 40 upper/lower intake fordged internals with 9.8-1 compression 1.6 rr. Im guessin ill hav to convert to mass air. Is it worth they swap??
 
Posted by Musttanguy (Member # 2251) on :
 
I have a complete MAF conversion available in fantastic condition.
89 computer harness (rewrapped in tape) in perfect condition with ZERO broken connectors, EEC-IV MAF computer A9? Computer. MAF meter (19lb) with bracket and intake hoses.
Everything like new !!!!
 
Posted by Moderator (Member # 6395) on :
 
I do recommend buying from tim..parts are damn near perfect all the time..when you do all the mods mass air is a must...being a modder isn't easy
 
Posted by 93ex chp (Member # 9016) on :
 
Torque boxes ,exhaust, 410s, and a shot of 75 of nitrous will most definatly boost your numbers up as well as drags..
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com