This is topic fuel line mods in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=023377

---

Posted by cmnotch (Member # 10452) on :
 
Hey guys, Im new to the forum and I just got back into the Mustang game. Im doing a 4cy to 5.0 swap. The hard lines that I got from a buddy have severe rust in the connection from the flexible lines at the cup where the hard lines connect and run up to the fuel rails. My question is: Could I cut the flex lines off at the fuel lines and cut the bottom spring loaded connectors off of the fuel line with the schrader valve and use some high pressure hose with some doubled up hose clamps to make the connection? Do you think the hose clamps will hold the fuel line on those chrome hard lines? Sorry for the long winded post. Thanks for the input.
 

---

Posted by 73 on DUBS (Member # 5677) on :
 
yup it will work cut them on the hard metal lines and get fuel injection hose and clamps should be ok
 

---

Posted by cmnotch (Member # 10452) on :
 
Thanks for the response. I will go for it! I didnt want to spend the money replacing the whole line set because I plan on doing a complete fuel system when I build the motor.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com