This is topic Ball Joints in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=023320
Posted by Jonny421Blaze (Member # 9303) on
:
I have a 88 mustang gt, and I swapped to the cobra five lug brakes. I'm using stock springs. The ball joints are bad and I need new joints. Does n e one have an idea if there is a difference between the stock 88 gt ball joints and the ball joints for the 93 mustang? TY for n e help, really appreciate it.
Posted by Adam5.0 (Member # 6995) on
:
they changed in 94. get those, should bolt right up with the spindles.
[ November 10, 2010, 11:51 AM: Message edited by: Adam5.0 ]
Posted by Jonny421Blaze (Member # 9303) on
:
Thanks for your reply. but I'm not sure if you mean that I should get the 94 ball joints. And if so do the fit on the 88 A control arm? I know the cobra brakes had a shorter stem on the ball joint. So is that why you say go with the 94 ball joint?
Posted by Adam5.0 (Member # 6995) on
:
the only thing changed was the stem length. they will work with your 88 control arms. its a direct swap. taking about the ball joints
[ November 10, 2010, 01:59 PM: Message edited by: Adam5.0 ]
Posted by Jonny421Blaze (Member # 9303) on
:
TY Adam5.0 that was helpful.
Posted by sydewayzLX50 (Member # 10217) on
:
quote:
Originally posted by Adam5.0:
the only thing changed was the stem length. they will work with your 88 control arms. its a direct swap. taking about the ball joints
+1 the 94-up ball joints work great w/ sn95 spindles, no spacer needed, and fit in fox body a-arms (have to be removed & replaced with a press)
Fueled by Ford Mustang Owners
on CaliforniaFords.com