This is topic I Have a Question On An AOD Transmission ?? Need Help? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=023206
Posted by 5.0 Based EnT. (Member # 9498) on
:
OK I HAVE AN 89' 5.0 MUSTANG THAT HAD A STOCK AOD TRANSMISSION AND IT WENT OUT ON ME. NOW I BOUGHT THIS OTHER TRANSMISSION AN AOD FOR A 5.0 A 92' BUT WHAT I DIDNT KNOW IS THAT IT WAS FROM AN 92' F150 5.0 SO IS IT STILL POSSIBLE TO MAKE IT FIT MY 89' MUSTANG???
Posted by Blind (Member # 3052) on
:
measure everything, may need to swap the tailhousing.
Posted by 5.0 Based EnT. (Member # 9498) on
:
sorry this is my first mustang and still learnin the inside of my car learning it in and out where is the tailhousing and where can i find one
Posted by rollininmy50 (Member # 9067) on
:
tailhousing, your nearest u pull it yourself will or should have an auto, also besure the gearing for a truck is the same for the car, may shift abnormally, or rev out..
Posted by Ken Collins (Member # 8236) on
:
I believe that model truck will have the short output like the Mustang but the shift levers will be different. Therefore the shift linkage will need changing which must have a nut removed on the inside along with the removal of a holding pin. It's possible the speedo drive gear has a different number of teeth as well.
Posted by 5.0 Based EnT. (Member # 9498) on
:
OK SO I WOULD HAVE TO OPEN THE BOTTOM OF THE TRANNY TO GET TO THE LINKAGE THAN SWAP THAT OUT
Posted by hidnn.o.s. (Member # 1219) on
:
Research where it's coming from and start over.
Fueled by Ford Mustang Owners
on CaliforniaFords.com