This is topic neutral safety switch? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=023029
Posted by blue notch (Member # 10204) on :
 
I just finished converting my 92 notchback to a 5.0 but Im having a problem with getting the car to start off the key. The harness and computer im using came from a manual but the transmission im running for now is an automatic. Does anyone know what I need to do to bypass and jump the neutral safety?

[ September 11, 2010, 12:00 AM: Message edited by: blue notch ]
 
Posted by 79 cobra (Member # 10137) on :
 
yeah were the clutch pedal is the is a switch in the back cut the wire and conect it 2 each other and u will bypass it
 
Posted by blue notch (Member # 10204) on :
 
quote:
Originally posted by 79 cobra:
yeah were the clutch pedal is the is a switch in the back cut the wire and conect it 2 each other and u will bypass it
yea but my car is an automatic so I don't have a clutch pedal. Is the switch still down in that general area where the clutch would be if it were a stick?
 
Posted by JohnB (Member # 969) on :
 
Yup, the connector will have four wires. Two for the backup lights, two for the NSS. Connect the white/pink stripe and the purple/pink stripe wires together. The other two are for the lights.

The connector should be on the driver's side, sticking through the floor pan just forward of the trans crossmember.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com