This is topic People with MarkVIII fans come in here in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022923
Posted by 91redmustang (Member # 10019) on
:
Im in the process of install one on my 88 notch and wanted to know if this is somewhat correct? Going to be using a 75 amp relay with a 150 fuse and 10 gauge wire. Still not sure what controller and temp sensor to use. which ones are you guys using?
Posted by 2stang (Member # 4237) on
:
Check out dccontrol.com.
Posted by VENOMUS PONY 5.0 (Member # 7785) on
:
i just got one to... is there like a step by step diagram for installation.
Posted by Blind (Member # 3052) on
:
http://www.dfwstangs.net/tech/markviii_fan/markviii.html
personally I ran the stock fan relay from a mark8, with 10awg wire for the power to the fan and from the relay to the battery, and 18awg from the relay to the temperature switch I installed on the thermostat housing.
Posted by 91redmustang (Member # 10019) on
:
Here is the one I am going to use... http://home.comcast.net/~smithmonte/Auto/MarkVIII_Fan.htm
Posted by 91redmustang (Member # 10019) on
:
And here is a 70 amp relay kit I was told would also work. I may end up using the one from the mark 8 like blind has http://www.painlesswiring.com/webcatalog/largeview.php?SearchField=30100
Posted by Blind (Member # 3052) on
:
btw you can mount the mark8 fan inside the stock foxbody fan shroud for a cleaner look -
http://www.socalstangs.com/forums/showthread.php?t=31066&highlight=fan
Posted by Als50 (Member # 6003) on
:
Lose the inline fuse and or circut breaker.
Posted by 91redmustang (Member # 10019) on
:
quote:
Originally posted by Blind:
btw you can mount the mark8 fan inside the stock foxbody fan shroud for a cleaner look -
http://www.socalstangs.com/forums/showthread.php?t=31066&highlight=fan
Is there a way you copy and paste... you have to be a member to see it
Fueled by Ford Mustang Owners
on CaliforniaFords.com