This is topic Anybody ever install STOCK front springs? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022878
Posted by phat50 (Member # 1998) on
:
Anyone ever install stock front springs without unbolting the A-arm from the k-member? If so ever have problems of the car comming off the jack stand while trying to jack the A-arm up?
Posted by racsirx (Member # 1710) on
:
What I have to do it for you?
Posted by 94 N.C.F. GT (Member # 3946) on
:
quote:
Originally posted by racsirx:
What I have to do it for you?
Lol I think so come on benny its not that hard to do
Posted by Blind (Member # 3052) on
:
quote:
Originally posted by phat50:
Anyone ever install stock front springs without unbolting the A-arm from the k-member? If so ever have problems of the car comming off the jack stand while trying to jack the A-arm up?
is the strut and swaybar disconnected from the lca?
make sure the spring is aligned right in the arm too, pigtail should end between the 2 alignment dots.
Posted by phat50 (Member # 1998) on
:
quote:
Originally posted by racsirx:
What I have to do it for you?
LOL! Na ill get it one of these days.
Posted by phat50 (Member # 1998) on
:
quote:
Originally posted by 94 N.C.F. GT:
quote:
Originally posted by racsirx:
What I have to do it for you?
Lol I think so come on benny its not that hard to do
For lowering springs no but for stock springs i think its a little harder.
Posted by phat50 (Member # 1998) on
:
quote:
Originally posted by Blind:
quote:
Originally posted by phat50:
Anyone ever install stock front springs without unbolting the A-arm from the k-member? If so ever have problems of the car comming off the jack stand while trying to jack the A-arm up?
is the strut and swaybar disconnected from the lca?
make sure the spring is aligned right in the arm too, pigtail should end between the 2 alignment dots.
No i havent took anything off yet, just trying to get info on how to install the springs before i start pulling it apart.
Posted by 90FoX (Member # 1974) on
:
put a few fat ass ppl in the car to weigh it down then the spring will compress more.
how close are the holes lined up?
[ August 19, 2010, 07:51 PM: Message edited by: 90FoX ]
Posted by Luke87GT (Member # 21) on
:
I always unbolt the A-arm from the K.
I've done a dozen sets of springs and never had a problem.
Posted by Duncan Motors (Member # 7045) on
:
i hate this gob most of all!
Posted by 94 N.C.F. GT (Member # 3946) on
:
quote:
Originally posted by Luke87GT:
I always unbolt the A-arm from the K.
I've done a dozen sets of springs and never had a problem.
benny sounds like this is going to to be the easiest way to do them for you
Fueled by Ford Mustang Owners
on CaliforniaFords.com