This is topic E303 instalation in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022805
Posted by CAStang (Member # 9568) on :
 
Looking to install a e303 cam in a completely stock block. Anyone have a "how to" link? And is this even worth doing on a perfectly healthy stock fox?
 
Posted by sic ls1 (Member # 7036) on :
 
I believe allfordmustangs has a how to for heads cam
 
Posted by 79 cobra (Member # 10137) on :
 
YES ITS WORTH IT BUT MUST GET ROLLER ROCKERS 1.6 RATIO
 
Posted by Adam5.0 (Member # 6995) on :
 
not worth it to me. just put some 1.7rr and be done with it
 
Posted by turbo50 (Member # 6700) on :
 
quote:
Originally posted by Adam5.0:
not worth it to me. just put some 1.7rr and be done with it
+1,000,000
 
Posted by JohnB (Member # 969) on :
 
Not worth the gasket set you'd need.
 
Posted by CAStang (Member # 9568) on :
 
Im not sold on doing it yet, just looking for ways to get a little extra power out of my DD.
 
Posted by 84SVOrick (Member # 9039) on :
 
Extra hp= gears, full exhaust, u/d pulleys
 
Posted by gercolla1 (Member # 3068) on :
 
sell the that cam and save for some gt40irons [patriot]
 
Posted by SPTVENM (Member # 7080) on :
 
ya dont make the same mistake i made, save and go all out....none of the Ecam crap

[ August 05, 2010, 05:15 PM: Message edited by: SPTVENM ]
 
Posted by Blind (Member # 3052) on :
 
an e cam in a stock e7 headed 5.0 will lose power, lol
 
Posted by 1HaTCheD5LiTEr (Member # 8269) on :
 
I wouldn't install the cam just yet. I would wait like I am now. I'm saving up some money to get an F cam and slap some heads on there at the same time and possibly a new intake as well. Saves money doing it that way as well as time. [patriot]
 
Posted by blown95svt (Member # 8893) on :
 
If you haven't already, throw some timing at her and run 91. You'd be amazed what ya can get for free. Then gears and exhaust.
 
Posted by CAStang (Member # 9568) on :
 
quote:
Originally posted by blown95svt:
If you haven't already, throw some timing at her and run 91. You'd be amazed what ya can get for free. Then gears and exhaust.
Im at 12 degrees already. How far can I push her??? Exhaust is done, but I'm not really looking to do gears just yet. Im waiting for my motor to die before I can actually build what I want. Until then, Im just looking for inexpensive tweeks to squeeze a little more juice out of her.
 
Posted by 89FOX (Member # 4273) on :
 
quote:
Originally posted by SPTVENM:
ya dont make the same mistake i made, save and go all out....none of the Ecam crap
Nothing wrong with an e-303 if u set it up rite! You need the rite combonation of parts to get it to work... [patriot] p.s i run a e-303 in my set up works good for me
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com