This is topic upper intake manifold spacer in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022797
Posted by Tsaleen17 (Member # 8173) on
:
Have an 87 Saleen 5.0, took off upper intake to change valve covers and gaskets, new covers were taller, bought a phenolic 1/2" spacer, got spacer and gaskets, got 4 bolts started, the last two at the back by the firewall, what a PITA..... Will go back at it tomorrow, seems that the manifold rocks a little, tried tightening down 2 of the 4 bolts that are started, also, spacer came with new bolts 1/2" longer than stock. Usually have luck with fresh start the next day. I welcome any suggestions. Thanks.
Fueled by Ford Mustang Owners
on CaliforniaFords.com