This is topic SN95 clutch problems in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022614
Posted by 925GT50 (Member # 2683) on :
 
My cobra doesn't seem to Take off upon removal o clutch pedal. I could rev it up to damn near 5k rpm and not able to spin the tires. It only starts to get up once I'm up at the 4k range.

All gears work properly no grinding or anything.
The throwout bearing is squeaking though faintly
My car has 128k on it and believed to have the stock clutch still in it. Any advice is appreciated I really want someone to drive it and see how it's acting.

[ June 30, 2010, 05:58 PM: Message edited by: 925GT50 ]
 
Posted by Nastysvt (Member # 6431) on :
 
Either your clutch is going out or you need a new throw out bearing
 
Posted by 925GT50 (Member # 2683) on :
 
quote:
Originally posted by Nastysvt:
Either your clutch is going out or you need a new throw out bearing
I plan to get a new clutch kit and flywheel. Would the clutch cable cause an issue?

I need someone in the 925 to replace my clutch. I got a quote for 250 but I gotta drive to sac. Anyone local looking for some side work?

[ June 30, 2010, 06:16 PM: Message edited by: 925GT50 ]
 
Posted by Nastysvt (Member # 6431) on :
 
i have a spec 3+ clutch. used still with life and a steel flywheel for$150 if your interested
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com