This is topic How hard is it? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022604

Posted by 50Reasons (Member # 6452) on :
 
How hard is it to put stock power windows in a 90' coupe that has never had power windows without changing the doors
 
Posted by turbo50 (Member # 6700) on :
 
quote:
Originally posted by 50Reasons:
How hard is it to put stock power windows in a 90' coupe that has never had power windows without changing the doors

Its a bitch. Im doing it right now.

All I can tell you is get the parts out of your year car.
 
Posted by Sic Wit it 50 (Member # 4119) on :
 
Jusss change the dooors way easier to juss install 2 doors then run a wire harness from pass to driv side connect n be done
 
Posted by turbo50 (Member # 6700) on :
 
nah. Hanging doors and then running the bitch of a harness (located under the window, behind the dash) then getting the shit repainted and lined up right...Id rather take 4 rivets to install the regulators and then wire it up.

Doors or not, you still have to wire up a manual window car.
 
Posted by LILstock3valve (Member # 4702) on :
 
~~^^^^~~ agreed. Both projects are complete whores but installing the hardware is the lesser of two evils. F hanging doors!
 
Posted by 50Reasons (Member # 6452) on :
 
I also got to swap out the dash to a black one I gave up trying to find roll up window armrest handles in black and allready have the power ones laying around in my garage, thanks what all do I need and do to do this right, or Turbo50 what would ya charge me to do this if I had everything and the dash removed pm me a price if you are or not interested

[ July 01, 2010, 03:59 PM: Message edited by: 50Reasons ]
 
Posted by turbo50 (Member # 6700) on :
 
I have people waiting for the next month to work on their cars so it would be awhile.

If you are swapping the dash, as I said in PM, then run the harness in at the same time.

Get some steel rivets and an industrial rivet gun (harbor freight about 34.00) and to it right.
 
Posted by 50Reasons (Member # 6452) on :
 
What's the harness look like in the dash I guess I will start hunting at pick in pull and for new window motors could I get those from craigens?
 
Posted by turbo50 (Member # 6700) on :
 
 -

 -


There ya go.

Not too bad of an install if your taking the dash out too.
 
Posted by 50Reasons (Member # 6452) on :
 
Coolmand I will call ya in a week in a half to reminds thanks Dan
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com