This is topic 03-04 Cobra parts in a fox coupe. in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022524
Posted by gtowned. (Member # 8156) on
:
So Im parting out an 04 Cobra right now and Im wondering is the irs a bolt in swap to a fox and I also want to know if the t56 is a direct swap.
My plans if I decide to go this route:
Fox coupe
04 Cobra irs
26 spl t56 w/rps clutch and fly
04 Cobra seats w/charcoal inserts
04 Cobra front brakes
havent decided on engine yet just wanna know if its a bolt in swap for the above parts.
Posted by Blind (Member # 3052) on
:
it's all basically bolt in, the irs is quite a bit wider though, should probably pickup s197 offset wheels so they tuck better.
have to drill a few holes to mount the cradle brackets, and make a new brake line setup for the rear brakes, and need SVO e-brake cables.
Posted by RODRIGUEZ (Member # 9104) on
:
Won't his wheels in the rear be sticking out some though even with the S197 offset wheels?
Posted by Blind (Member # 3052) on
:
quote:
Originally posted by RODRIGUEZ:
Won't his wheels in the rear be sticking out some though even with the S197 offset wheels?
nope.
96+ spindles, 99+ SRA (same track as 99+ IRS afaik)
those are stock s197 wheels, 17x8's I'm pretty sure.
Posted by JohnB (Member # 969) on
:
Yup, 99+ IRS is the same track width as a 99+ SRA.
Fueled by Ford Mustang Owners
on CaliforniaFords.com