This is topic NITROUS INTERNALS in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022521
Posted by Quik351 (Member # 7859) on
:
Im building a 408w and wanted built for nitrous was thinking more like 200 shot what stroker kit would recommend
Posted by Duncan Motors (Member # 7045) on
:
fully forged and h beam
Posted by Quik351 (Member # 7859) on
:
do i need to buy nitrous pistons if so what kind
Posted by Adam5.0 (Member # 6995) on
:
forged pistons, nitrious loves compression
Posted by Quik351 (Member # 7859) on
:
but i was thinking 12.1 comp and the shot was thinking to go with the scat stroker kits what u guys think so far i have
AFR 225
74'351W
C-4 SUPER COMP
BBK LONGTUBES
1.7 RR'S
Posted by Quik351 (Member # 7859) on
:
ANY SUGGESSTION ON KITS FOR MY SETUP
Posted by 1SLOWLX (Member # 558) on
:
A Wilson setup. Or if your thinking about being bad ass have induction solutions setup a fogger for you!
Posted by Quik351 (Member # 7859) on
:
who are they and where can u get a wilson setup
Posted by 1SLOWLX (Member # 558) on
:
Look them up pro flow nitrous.
Or steve at induction solutions.
Remeber you get what you pay for
Posted by itznotahighway (Member # 7934) on
:
the real man when it comes to nitrous....
http://www.montesmithperformance.com/
Posted by Quik351 (Member # 7859) on
:
WHERE IS STEVE LOCATED AT HOW EXPENSIVE WE TALKIN
Posted by 1SLOWLX (Member # 558) on
:
http://www.induction-solutions.com/
Fueled by Ford Mustang Owners
on CaliforniaFords.com