This is topic Polishing a lip on a all black wheel.. in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022489

---

Posted by SIC9250 (Member # 8216) on :
 
got powdercoated black wheels and i wanna polish the lip...any ideas?? gotta good deal on the wheels but dont wanna run all black i would love to polish the lip but is it too late??
 

---

Posted by essasin (Member # 4741) on :
 
I used aircraft stripper and a pressure washer on an intake manifold. It worked well except for the little crevices on the manifold which took more time.
 

---

Posted by 94 N.C.F GT (Member # 8722) on :
 
I you use that stuff make sure you ware gloves and safety glasses
 

---

Posted by SydeWaySix (Member # 3596) on :
 

quote:

---

Originally posted by essasin:
I used aircraft stripper and a pressure washer on an intake manifold. It worked well except for the little crevices on the manifold which took more time.

---

I doubt you'd be able to tape off just the lip if you use air craft stripper...that will most likely work IF you plan to strip the whole wheel.
 

---

Posted by SIC9250 (Member # 8216) on :
 
got my answers...thanks for the help....eh not really...
 

---

Posted by dipped50707 (Member # 6344) on :
 
powder coats are hard as shit to get off.. u have to strip thew whole wheel then start obver
 

---