This is topic which cam? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=022096

---

Posted by 65coupe87notch (Member # 9621) on :
 
i have a stock bottom end. 165afr alum heads. 1.6rr. edelbrock intake. 24#injectors. headers. bbk cold air. which cam should i go with? any suggestions
 

---

Posted by 5.7L EATER (Member # 9451) on :
 
tfs1
 

---

Posted by 65coupe87notch (Member # 9621) on :
 
is the tfs1 cam this cam rite here? TFS-51402000
i wont have to modify my pistons or anything esle right?
 

---

Posted by 707vibrantcobra93 (Member # 4702) on :
 
Tfs cams get a big thumbs down IMO. My stage 2 was shit. A comp cam would be a better grind for an oft cam.

Cca-35-349-8 212/218 duration .512"/.512" lift
cca-35-351-8 218-224 duration .512"/.512" lift

should have ample p/v clearance but would double check
 

---

Posted by 65coupe87notch (Member # 9621) on :
 
i think im going to try out the trickflow stage 1 cam. i have the b303 in it rite now
 

---

Posted by SHORTSHIFTER89 (Member # 7810) on :
 
Im running the tfs stage1 cam with the tfs heads track heat intake. i would say it starts pulling hard at about 3000rpm up until 6000rpm. i like it noing i could still pull more hp out the motor with a better cam.Vibrantcobra93 is right about the custom cam.you cant go wrong. your bcam should just be giveing you alot of torgue.
 

---

Posted by Notch_notch (Member # 8902) on :
 
i would say B-cam...
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com